Wednesday 26 August 2009

Loonie Blooms

Cover page copy 

Annette's wall hanging is in the mail and I’ve finally gotten this pattern put together for everyone!  Major difficulties with computer programs and posting pdf’s but I hope everyone can pop over to the Scribd links (see below) and download the pattern.  All of the information on pages one, two and three of have been copied here in the tutorial, but to make the actual pattern you will need to download the “appliqué patterns & supply list” (see link below).

This pattern has been designed using the raw-edge appliqué technique . . . any other methods will require you to make adjustments as necessary. Remember that this is your design and it is OK to put on as many flowers or leaves on it as YOU want. Add buttons or beads for the flower centers – make it as “loonie” as you want! (Oh, I forgot to tell you about the name of the design . . . the larger centre circle in the middle of the bloom was traced from a Canadian $1.00 Loonie – I decided the $2.00 Toonie was just too big).

Loonie Blooms - Appliqué Patterns & Supply List

Loonie Blooms - Page 1

Loonie Blooms - Page 2

Loonie Blooms - Page 3

Following the supply list included on the template sheet cut and lay out all of your background, border pieces and ground shape. I used many prints from the one line of fabric and the scrappiness of it appeals to me . . . so if you have a piece of fabric that fits, put it in! My fabrics came from a MODA Scrap Bag, except for the flower pot which was cut from a charm square and of course the background, backing and binding where cut from yardage. This project would be a great way to use up some fabrics from the scrap bin – remember those little pieces you just threw in there – dig them out!


snowman series

Referring to the project photo, sew the borders to the background fabric – note that the ground shape is inserted before the outer borders are sewn on.

DSC03882 DSC03885

Once all borders have been completed, give it all a good pressing.

Trace all of your chosen appliqué shapes on the paper side of the Heat & Bond fusible web. Roughly cut out the shapes leaving a small allowance on all sides. Iron to the wrong side of all your chosen prints – cut out on the drawn lines.

Stems – cut a 3” x 17” piece of Heat & Bond and press it onto the wrong side of your green stem fabric. Let cool and then cut 5 strips either ¼” or 3/8” strips by the 17” length – whichever width you prefer.

DSC03904


Now that you have the background all pressed and ready and you have your stems and appliqué shapes all ready to go, it is time to start positioning things where YOU want them to go. I found that to get the nice curve on your stems is easiest done by ironing it from the bottom up – gently curving the stem as you press it. I found that by starting with the centre stem and working your way out is easier. Take your time and get things in the spots where you want them. If you forget to position a leaf you can usually go back and reheat the stem with the iron and then gently lift the edge and slip the leaf shape under.


DSC03906


Find matching threads for all your fabric and use a bobbin thread that matches your backing.


DSC03912


I used a zig-zag stitch to stitch down the stems on my first wall hanging, but a machine blanket stitch would work as well.


DSC03914


Now it’s time to stitch your shapes. Set up your machine for free-motion quilting and drop your feed dogs.


DSC03918

Lower your needle into the shape (fairly close to the edge) and then raise the needle and gently pull on the top thread to bring up the bobbin thread to the top. Hold on to your two threads and lower the needle up and down in the same spot to secure the threads. This can create a bit of a thread lump on the backside so I like to darn in my ends . . . I know it takes a bit longer but I think it does give a more finished look. I usually stop my stitching after doing a few shapes and darn in those ends – this helps eliminate stitching over the loose threads.

DSC03925

Now start free-motion quilting around the edge of your shape. I actually went around my shapes three times – no reason, but that was just the look I liked. You can do only two or even choose more if you wanted. This method does take a bit of practice and I find that by going around your shape more than once kind of fills in the squiggly, meandering stitches that we all make – it would take a lot of practice to not have the stitches go helter-skelter like some of mine!

You can also add details to your leaves, flowers or stems if you feel that you want to branch out from the raw-edge stitching. Stitch in some vein lines on the leaves or some petal shapes on your flowers – anything you choose adds even more detail.

You could also make some curly-q’s or stitch some free-form leaves – anything goes so have fun!

I used a cream top thread and meander quilted the rest of the quilt top; quilting around, not over, the appliqués shapes.

DSC03926

Once all the stitching is complete, prepare your tabs.

Cut two 3 3/4” x 8 ½” rectangles from the print and background fabrics and layer one of each  right sides together.  Fold in half horizontally and place the 60 degree line on the folded edge; cut as shown to form the little point. Stitch ¼” from the edges, leaving the straight edge open for turning. Turn right side out and press.

DSC03927


DSC03928

With the right side of the tabs facing the wrong side of the top of the wall hanging, baste the tabs approximately 2¼” in from each side. Flip the tab over to the right side to make sure it is facing the right way!

Now prepare your binding strips and stitch to the front side of your wall hanging, mitering corners as you go.

Hand stitch the binding to the back side.

DSC03902

Make the little buttons following the instructions on the package.  Stitch the tabs and buttons in place.

Label your little creation and enjoy!

Send me photos when you get your “loonie”  little project done . . . I’d love to see the blooming variations that everyone comes up with!

‘til next time,

M.

12 comments:

Quilter Going Bananas said...

Wow Marlene! I just downloaded and printed the pages, it's so exciting!
Thanks so much for sharing this with us quilters :^)

dotti white said...

This looks wonderful! I am so excited to make one! Have a terrific day!

Jossie said...

This is lovely. Thank you so much for sharing the pattern.

Betsy said...

Thank you for sharing.

Patchmaker said...

Oh my . . thanks for sharing!

Jilly's Space said...

Thank-you so much for sharing this, I will definately be downloading this pattern!!

Stina Blomgren said...

Thankyou... :o) Have it downloaded.... worked just fine...
Thanks for taking precious time to make this for us all!! :o)

Karen said...

"Loonie Blooms". A quirky name and I like it. Thank you for sharing!
I also just read an explanation of "Sipiweske Quilts" name. Interesting.

Myra said...

Thanks for sharing your pattern M! I will add it to my "to do" list... 8-)

What Comes Next? said...

oh no! Another project that I just have to make! :) I'll just slip this in somewhere, 'cause its just too darn cute! Thank you Marlene, I've just printed off all the instruction sheets, and everything looks well laid out. Now to layout my time over the next few days...

Edna said...

I'm finally catching up on some blog-reading and look what I find!! What a super project! Now, I'm going to HAVE to try to work this one in.... Thanks for sharing the great pattern!

Anonymous said...

Hello. This is my first time visiting your blog and it is lovely. I printed your design and can't wait to give it a try. I am not very good at things like this, but I am definitely going to give it my best effort. Thanks for offering it as a complimentary design. Take care.